Hyundai Matrix service from 2002 to 2006 of release
	1. Operation and car maintenance
	2. Engine
		2.1. Maintenance
			2.1.1. Check of level of engine oil
			2.1.2. Replacement of engine oil
			2.1.3. Choice of the oil filter
			2.1.4. Replacement of the oil filter
			2.1.5. Check of tightness of system of cooling
			2.1.6. Check of valves of a cover of a radiator
			2.1.7. Check of concentration of antifreeze
			2.1.8. Compression check
			2.1.9. Adjustment of a tension of a belt of a drive of GRM
			2.1.10. Drive of hinged units
			2.1.11. Natyazhitel of a belt of a drive of hinged units
			2.1.12. Adjustment of a belt of a drive of hinged units
			2.1.13. Adjustment of a belt of a drive of the generator
		2.2. Mechanical part (engine of 1,6 l)
		2.3. Mechanical part (engine of 1.8 l)
		2.4. Cooling system
		2.5. Greasing system
		2.6. Power supply system
		2.7. Control system, fuel system and system of decrease in toxicity
		2.8. Tables
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Electric equipment schemes

2-1-4-zamena-maslyanogo-filtra.html

2.1.4. Replacement of the oil filter

ATTENTION

Be careful, do not burn, as engine oil is hotter.

By means of a special key remove the filter of engine oil.

Fig. 2.4. Drawing of engine oil on filter laying

Before installation of the new filter on the engine grease with a small amount of pure engine oil filter laying (fig. 2.4).

Tighten the oil filter the nominal moment.

Moment of an inhaling of the oil filter: 12–16 N · m.

Start the engine and be convinced of absence of leakages of engine oil.

Muffle the engine and check level of engine oil. If necessary add oil.